CERAMICSPEED UFO DRIP ALL CONDITIONS 100 ml lánc wax

How to apply UFO Drip All Conditions: Thoroughly shake bottle before use. For new chains or the first application, start with a fully clean and dry chain. Apply UFO Drip All Conditions wax coating directly to the chain rollers over the cassette while rotating the chain slowly to coat the entire length of the chain twice. Next, apply UFO coating to the inside of the chain, along the rollers on the bottom span over the chain and coat the entire length of the chain twice. A complete coating will use about 8ml, or an 8-gram difference by weight. For best penetration, continue rotating the cranks for 30 to 60 seconds to ensure the wax can get down between the chain rollers and links. For best durability and clean performance, let the UFO Drip chain coating dry overnight. It is not suggested to wipe off the wax from the surface of the chain. A proper application will last 300km / 180 miles in generally dry and clean conditions. For standard reapplication, wipe off any surface dust with a clean towel and apply UFO coating to the chain links above the cassette along the length of the chain twice. If the drivetrain has been contaminated, the bike has been washed, or ridden in wet conditions we suggest a full clean and reapplication following the first application guidelines. If you ride in the wet often, we recommend the UFO Drip Wet Conditions. Keep it out of direct sunlight and in a temperature range of 5-30 degrees Celsius (30-85 Fahrenheit). – do not freeze.